Wellmet Assembly Required Lampshade for Table Lamp,Bedside Lamp,Floor Lamp,Fabric Drum Lampshade Classic Modern Style,Spider Fitter.
Wellmet Assembly required Drum Lampshades Install Guide
- Using a screwdriver to tighten the screws of metal support first.
- Second,Putting the top and bottom rings together.( each ring is in three parts.)
- And pressing the top and bottom rings to the fabric via zip lock strips of plastic.
- Please make sure the front side of top ring is upside (the side which can see the metal screws is the front side) before put it on the shade of plastic grooves.)
- Then pressing the fabric again and remove the double-sided tape on one end of the shade and press the two together.
- Finally,Put the lampshade on your lamp,the five color and size are matches the most of lamp.
Why does the lampshades need to assemble?
We fully understand how maddening when our customer received a damaged lamp shades！ so provides a ASSEMBLY NEEDED LAMPSHADES which solves the problem that is easy to be damaged in-transportation.
In addition,only takes you 10 minutes,same as you do simple handwork at home. you can watch the video about installtion guide.
Reminder:
- The lampshade comes apart,had to be assembled. If you can not accept,do not buy it.
- the side of TOP RING which can see the metal screws is the front side.
- The Fabric comes rolled up,Put a book on the end of fabric to make it spreaded when you install .
- Standard top ring with spider fitter requires a harp.(harp not include in package.)
Measuring lamp shades for table lamps
Most table lamps take a shade with a bottom diameter of 16″ or less, unless the table lamp is especially tall. “Mini” table lamps will need a much smaller shade.
Measure the lamp’s height from the bottom of the base to just below the bulb socket. Try to find a lampshade with a bottom width approximately equal to this measurement.
A good height for lamp shades for table lamps is about 3/4 of the width of the shade, or 3/4 the height of the base up to the socket.
You’ll want to make sure that when the lampshade is positioned on the lamp, it will be tall enough to cover the top of the lamp fitter, and also hide the hardware, socket and part of the neck of the lamp base. When you view the lamp from the side you shouldn’t see the hardware parts.
Measuring lamp shades for floor lamps
Floor lamps take a shade with a bottom diameter of 16″ or 18″ or larger. Similar rules apply as for table lamp shades, where the shade needs to be tall enough to cover the hardware so that you don’t see the lamp socket or fitter from the side.
Floor lamps typically require a slightly larger shade than table lamps. Also due to the height of the lamp, they tend to look better with a drum or floor-style shade. A floor shade is almost a drum shade, except the sides are slightly slanted. This shape complements the proportions of the floor lamp.
Linen Lamp Shades
Linen is all the rage. A Linen lamp shade suits many modern homes where beige linen and light browns provide a soft, comforting and nurturing environment. Linen shades can complement well with brown furniture or perhaps a beige couch. Often a linen lamp shade will complement a fancy decorated lamp base well.
Make sure this fits by entering your model number.
NEED ASSEMBLE:Be Noted, Self Assembly Required,It will take about 10 minutes. If you can not accept self assembly,do not buy it.
MATERIAL: The ring is made of plastic but strong enough to support the lampshade.the cotton fabric materials which will provide good light for reading and relaxing.
SIZE:13 inches top diameter,13 inches bottom diameter,10 inches tall; 0.4 inch spider diameter .
SPIDER FITTER：This lampshade can only be used on table lamps or floor lamps with harp support,Make sure your fixture is spider and has harp, otherwise you need to buy harp to use this shade.More details please watch the video.
Make sure your desired size:recommend measuring to your existing lampshade–a replacement harp may be needed for a proper fit or additional adjustment if changing height of shade.
